Showing posts with label do it yourself. Show all posts
Showing posts with label do it yourself. Show all posts

Thursday, September 3, 2009

SAWMILL









     Well, it has been very busy! But I must report that the sawmill was a success. We went to our property for 10 days and I was able to use the saw to cut planks out of black oak, pine, and cedar. I did decide that I need a larger engine so that I can cut faster. Speed is always good, right? So here are a few pictures.
     My wife took some of the cedar that I had cut and planed, and she surprised me for Christmas.  This is the mantel she made.



Sunday, May 3, 2009

2001 VW Passat Maintenance

I put 400 miles a week on my commuter car. I am sure there are many of you that put more miles on your cars and trucks. In the last 10 months I have put 19,000 miles on my car. On my chevy 3500, I have put 44,000 on it in the last 2.5 years. Either way, the best way to keep your vehicle in tip top shape is to maintain them.

First, I try to follow the maintenance instructions in the owners manual.
Second, I use the same fluids when I change them. I change the oil every 5,000 miles. I know lots of people say you must go 3,000 miles, but I have never had any issues with it.
It has a big effect on performance when maintained properly. Changing the air filter, oil filter,and oil regularly will keep your car getting the best mileage out of your engine. A service at any quick lube usually runs about $40. You can buy the oil and filter for $10-$20 unless you use synthetic oils(these do have benefits).

The items needed to change your oil can be picked up rather cheaply. This jack was only $10 after rebate. A must to get under a low car.(I would NEVER get under a jacked up vehicle without using jack stands)Then, most parts stores have adds for filters and oils together. They are usually advertised as 1 filter and 5 quarts of oil for $10 -$15. Some like the Peak in this picture were free after rebate. The only other thing needed is a drain pan, the correct wrench for the drain plug and a filter wrench. Always get rid of oil properly after you are done. All parts stores will take your used oil.
I know in the beginning it is a little more expensive to buy the tools needed, but these tools only get purchased once. Then they start to pay themselves off each time you use them. I cannot even imagine how much money I save doing my maintenance and repair on my own.

Wednesday, April 8, 2009

Now Let's Try It!



How many times have you said "Yes" when asked, "Do you want us to change your wiper blades?" Have you checked the receipt to see how much they charged you? Rather than paying your local quick lube to change your wiper blades, Let's Do It Yourself! Wipers can be bought at your local Walmart, or Parts stores. The machines to help you buy the right ones are as basic as an ATM. So once you have the correct ones, lets put them on.
First Remove the old one by pressing the tabs to release it.


Second open the new wiper and put on the adapter if needed. Then snap the new wiper into place. Presto! You just saved yourself $10-$20!!

HOW TO SAVE ON MECHANIC WORK

Tired of paying for high priced mechanic work? Don't think you can do it yourself? Let's help!
Here is a list of Basic Tools needed.
1. Cresent (adjustable) wrench
2. Flat scew driver
3. Phillips scew driver
4. Latex gloves
5. Socket set(metric & standard)
6. Ratchet and extension
7. Oil filter wrench
8. Pliers


These tools alone will help you to save money doing it yourself instead of paying to have it done.